TTL ELECTRO-PHYSICAL AND CHEMICAL TESTING OF ELECTRO-INSULATING MATERIALS >>
TTL TESTING OF MICROMACHINES >>
TTL TESTING OF LOW-VOLTAGE ELECTRIC DEVICES AND COMPLEX COMUTATION DEVICES (LVED AND CCD) >>
TTL TESTING OF HOUSEHOLD AND SIMILAR ELECTRIC APPLIANCES >>
TTL TETSING OF MANUAL ELECTRIC INSTRUMENTS >>
TTL TESTING OF NOISE AND VIBRATIONS >>
TTL ENVIRONMENTAL TESTING AND MECHANICAL DYNAMICAL TESTS >>



TTL ELECTRO-PHYSICAL AND CHEMICAL TESTING OF ELECTRO-INSULATING MATERIALS AND ELECTRO-INSTALLATION APPLIANCES
BDS 5357 : 90 Electro-insulating varnishes - Test methods **
BDS EN ISO 2811-1:2002 Paints and varnishes - Determination of density - Part 1: Pyknometer method
BDS EN ISO 2811-2:2002 Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method
BDS EN ISO 1522:2001 Paints and varnishes - Pendulum damping test
BDS 6963:84 Impregnation varnishes - Method of accelerated heat resistance testing **
BDS 2324:83 Solid electro-insulating materials - Determination of dielectric strength at a. c. voltage with industrial frequency **
BDS 6727:83 Solid electro-insulating materials - Determination of dielectric permittivity and tangent of dielectric losses angle **
BDS 6728:82 Solid electro-insulating materials - Determination of electric resistances at d. c. voltage **
BDS 6653:82 Plastics - Compression testing method **
BDS EN ISO 179-1:2003 Plastics - Determination of resistance to blows of Charpy impact properties
BDS EN ISO 527-1:2002 Plastics - Determination of tensile properties - Part 1: General principles
BDS EN ISO 527-2:2002 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics
BDS 6727:83 Solid electro-insulating materials - Determination of dielectric permittivity and tangent of dielectric losses angle **
BDS 6728:82 Solid electro-insulating materials - Determination of electric resistances at d. c. voltage **
ST of SIV 895:1978 Plastics - Determination of Martens heat resistance **
BDS EN ISO 306:2002 Plastics - Thermoplastic materials - Determination of Vicat softening temperature
BDS EN 60811-1:1999 Insulating and sheathing materials of electric cables - Common test methods - Part 1: General application - Section 1: Measurement of thickness and overall dimensions - Tests for determining the mechanical properties
BDS EN 60317-0-1:2000 Specifications for particular types of winding wires - Part 0-1: General requirements - Enamelled round copper wire
BDS EN 60851-1:2001 Winding wires - Test methods - Part 1: General
BDS IEC 332-1:1999 Tests on electric cables under fire conditions - Part 1: Test on a single vertical insulated wire or cable
BDS IEC 332-2:1999 Tests on electric cables under fire conditions - Part 2: Test on a single small vertical insulated copper wire or cable
BDS 6259:1991 Cables, conductors and cords - Methods of construction and examination of constructive dimensions **
BDS 2406:1982 Cables, conductors and cords - Testing with voltage methods **
BDS 2374:1982 Cables, conductors and cords - Method of testing of current-conductive core electric resistance **
BDS 1696:1970+I1:12/75 Insulation rubberized band **
BDS EN ISO 178:2002 Plastics - Determination of flexural properties
BDS EN 60903+11:2001 Specification for gloves and mitts of insulating material for live working
BDS EN 50321:2001 Electrically insulating footwear for working on low-voltage installation
IEC 1340-4-1:1995 Electrostatics - Part 4: Standard test methods for specific applications - Section 1: Electrostatic behaviour of floor coverings and installed floors
BDS EN 61112:2003 Blankets of insulating material for electrical purposes
BDS ENV 61111:2003 Mattings of insulating material for electrical purposes
BDS 9914:80 Rubbing electro-insulating covers **
BDS 15969:84 Electrostatics - General requirements for protection **
BDS 8429:78 Textile materials - Determination of electrical resistance **
BDS EN 1149-1:2001 Protective clothing - Electrostatic properties - Part 1: Surface resistivity
BDS EN 1149-2:2001 Protective clothing - Electrostatic properties - Part 2: Test method for measurement of the electrical resistance through the material (vertical resistance)
BDS EN 50237:2001 Gloves and mitts with mechanical protection for electrical purposes
BDS 14097:84 +1:2000 Boots of PVC
BDS EN 347-1+1:2000 Occupational footwear for professional use - Part 1: Specification
BDS EN 61340-4-3:2003 Electrostatics - Part 4-3: Standard test methods for specific applications - Footwear
BDS EN 388:2001 Protective gloves against mechanical risks
BDS EN 344-1+A1:2000 Safety, protective and occupational footwear for professional use - Part 1: Requirements and test methods
BDS EN 397+A1:2001 Industrial safety helmets
BDS 5948:1981 Solid electro-insulating materials - Standard environmental conditions for specimen preparation and testing **
BDS 7230:1991 Solid electro-insulating materials - Method for CTI determination in damp environment **
BDS 4794:1978 Brushes for electrical machines - Test methods **
BDS 7258:1987 Solid electro-insulating materials - Method for determination of the resistance to electric arc due to low current and high voltage **
BDS 14516:1987 Solid electro-insulating materials - Method for determination of the resistance to electric arc due to direct current and low voltage **
BDS 15633:1983 Printing-boards - Test methods **
BDS 15634:1983 Printing-boards - General technical requirements **
BDS EN 61086-2:2003 Technical requirements for coatings for loaded wired printing-boards (auxiliary coatings) - Part 2: Test methods
BDS EN 61086-3-1:2003 Technical requirements for coatings for loaded wired printing-boards (auxiliary coatings) - Part 3: Specifications for separate materials - Sheet 1: Coatings for general purposes (class I) and for higher safety (class II)
BDS 4305:1990 Conductors with PVC insulation for electrical installations **
Top



TTL TESTING OF MICROMACHINES
BDS EN 60034-1+1+2:2001 Rotating electrical machines - Part 1: Rating and performance
BDS 6949:1987 Electrical d. c. machines - Testing methods **
BDS 5872:1986 Three-phased asynchronous electrical machines with caged rotor with rotating axis height from 71 to 355 mm for voltage to 660 V **
BDS 5444:1982 Electric household fans **
BDS 7597:1979 Pitched electrical machines - Technical requirements and test methods **
BDS EN 60204-1:2003 Safety of machinery - Electrical equipment of machines - Part 1: General requirements **
BDS EN 60204-31:2003 Safety of machinery - Electrical equipment of machines - Part 31: Particular requirements for sewing machines, units and systems
BDS EN 60034-5:2002 Rotating electrical machines - Part 5: Classification of degrees of protection provided by the enclosures of rotating electrical machines (IP code)
Top



TTL TESTING OF LOW-VOLTAGE ELECTRIC DEVICES AND COMPLEX COMUTATION DEVICES (LVED AND CCD)
BDS 3676-80 Appliance couplers with brake protective devices for household electric installations up to 16 A, 250 V - Dimensions **
BDS 17183-90 Appliance couplers for household electric installations **
BDS 10156-72 Single-conducted plugs for electro-measuring devices **
BDS EN 60309-1:2002 Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements
BDS EN 60309-2:2002 Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories
BDS EN 60320-1:2002 Appliance couplers for household and similar general purposes - Part 1: General requirements
BDS EN 60320-2-1:2002 Appliance couplers for household and similar general purposes - Part 2-1: Sewing machines couplers
BDS EN 60320-2-2:2002 Appliance couplers for household and similar general purposes - Part 2-2: Interconnection couplers for household and similar equipment
BDS EN 60320-2-3:2003 Appliance couplers for household and similar general purposes - Part 2-3: Appliance couplers with a degree of protection higher than IPX0
BDS EN 1175-1:2002 Safety of industrial trucks - Electrical requirements - Part 1: General requirements for battery powered trucks
BDS EN 60669-1:2002 Switches for household and similar fixed electrical installations - Part 1: General requirements
BDS EN 61058-1:2002 Switches for appliances - Part 1: General requirements
BDS N 61058-2-1+A1:2002 Switches for appliances - Part 2-1: Particular requirements for cord switches
BDS EN 60269-3:2002 Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications)
BDS EN 60269-4+A1:2002 Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices
BDS 4107-83 Caps for screw fuses 25 and 200 A, 500 V, and 63 and 100 A, 500 and 700 V - Dimensions **
BDS 4108-83 Cartridges for screw fuses up to 500 V - Dimensions **
BDS 4109-73 Limitation for screw fuses from 25 to 200 A and installation appliances - Dimensions **
BDS EN 60269-2:2002 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorised persons (fuses mainly for industrial application)
BDS 4296-75 Melting fuses for low voltage with industrial and similar use - Dimensions **
BDS 15103-80 Melting fuses for low voltage with industrial and similar use - Dimensions **
BDS 4725-77 Water-protective distribution enclosures **
BDS 11241-78 Cable distribution enclosures **
BDS 14895-79 Terminal enclosures for connecting conductors with section from 1,5 to 4 mm **
BDS EN 60947-1+1+2:2002 Low-voltage switchgear and controlgear - Part 1: General rules
BDS EN 60947-2+1+2:2002 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
BDS EN 60947-3+1:2002 Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
BDS EN 60947-4-1:2002+1:2003 Low-voltage switchgear and controlgear - Part 4: Contactors and motor-starters - Section 1: Electromechanical contactors and motor-starters
BDS EN 60947-5-1+1+2+12:2002 Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices
BDS EN 60947-6-2+1+2:2002 Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment)
BDS 5847-76 Control disconnectors for electric hoists **
BDS 8708-86 Terminal disconnectors for electric hoists **
BDS 7861-74 Electro-mechanical relays - Technical requirements **
BDS 7862-74 Electro-mechanical relays - Accepting rules - Test methods **
BDS 7163-83 Electromagnetic devices up to 660 V a. c. and 600 V d. c. **
BDS EN 60999-1:2000 Connecting devices - Safety requirements for screw-type and screwless-type clamping units for electrical copper conductors - Part 1: General requirements and particular requirements for conductors from 0,5 mm2 to 35 mm2
BDS EN 60998-1:2000+A1:2003 Connecting devices for low-voltage circuits for household and similar purposes - Part 1: General requirements
BDS EN 60998-2-1:2000 Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units
BDS 11517-87 Car electric equipment - Disconnectors and switches **
BDS 5150-80 Electric equipment for cars, tractors and motorcycles - Switches for signposts
BDS 10154-92 Car electric equipment - Seven-clamped plugged dividers
BDS 10918-87 Car electric equipment - Mechanical disconnectors - Installation round outlets - Dimensions **
BDS 14034-77 Car electric equipment - Mechanical disconnectors - Installation round outlets - Dimensions **
BDS EN 60204-1:2002 Safety of mashinery - Electrical equipment of machines - Part 1: Car electric equipment - Relays for light signposts
BDS EN 60439-1:2002 Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
BDS EN 60439-2:2001 Low-voltage switchgear and controlgear assemblies - Part 2: Particular requirements for busbar trunking systems (busways)
BDS EN 60439-3+A1+A2:2002 Low-voltage switchgear and controlgear assemblies - Part 3: Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use - Distribution boards
BDS EN 60439-5+1:2002 Low-voltage switchgear and controlgear assemblies - Part 5: Particular requirements for assemblies intended to be installed outdoors in public places - Cable distribution cabinets (CDCs) for power distribution networks
BDS 5053-79 Complex controlling devices - Cabinets for controlling the electric street lighting **
BDS 10250-72 Complex commutation devices - Distribution low-voltage switchgears and controlgears **
BDS 3982-78 Residential electric switchgears and controlgears **
BDS 4954-84 Electric distribution cabinets for low-voltage cable grid **
BDS 8712-76 Electric switchgears and controlgears for electric hoists **
BDS 9090-86 Elevators - Controlgears enclosures **
BDS 13053-75 Complex commutation devices up to 1000 V a. c. and 1200 V d. c. -Electric safety requirements **
BDS 449-85 Transformers for electric arc-welding **
BDS 7461-75 Transformers and drossels for gas-discharged tubes **
BDS 3067/3-90 Transformers for general purposes - Insulation levels and dielectric tests **
BDS 3067/7-90 Transformers for general purposes **
BDS EN 61558-1+1:2002 Safety of power transformers, power supply units and similar - Part 1: General requirements and tests
BDS EN 61558-2-3:2002 Safety of power transformers, power supply units and similar - Part 2-3: Particular requirements for ignition transformers for gas and oil burners
BDS EN 61558-2-8:2002 Safety of power transformers, power supply units and similar - Part 2-8: Particular requirements for bell and chime transformers
BDS EN 61558-2-13:2002 Safety of power transformers, power supply units and similar - Part 2-13: Particular requirements for auto-transformers for general use
BDS 4329-88 Semi-conductor rectifiers **
BDS 6844-85 Rectifiers for electric arc-welding **
BDS 11680-85 Semi-conductor rectifiers for electro-chemical application **
IEC 60060-1:1989 High-voltage test techniques - Part 1: General definitions and test requirements
BDS EN 60060-2+11:2003 High-voltage test techniques - Part 2: Measuring systems
BDS 8591-71+1:2003 Instrument transformers - Test techniques
BDS EN 60044-1:2001 Instrument transformers - Part 1: Current transformers
BDS EN 60044-2+1+2:2003 Instrument transformers - Part 2: Inductive voltage transformers
BDS EN 60529:2001 Degrees of protection provided by enclosures (IP code)
EN 50102:1996 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code)
BDS EN 60238+1:2002+2:2003 Edison screw lampholders
BDS EN 60061-1+1+2+3+4+5+6+7+ 21+22+23+ 24+25+26+27:2002+28+29+30+31:2003 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
BDS EN 60061-3+1+2+3+4+5+6+7+ 20+2122+23+24+25+26:2002+ 27+28+29+30:2003 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
BDS EN 60399+1:1999+2:2002 Standard sheets for barrel thread for E14 and E27 with shade holder ring
IEC 60086-1:2000 Primary batteries - Part 1: General
IEC 60086-2:2000 Primary batteries - Part 2: Physical and electrical specifications
BDS EN 60974-1:2002+1:2002 Arc-welding equipment - Part 1: Welding power sources
BDS EN 60974-5:2003 Arc-welding equipment - Part 5: Wire feeders
BDS EN 60974-6:2003 Arc-welding equipment - Part 6: Limited duty manual metal arc welding power sources
EN 50298:1998 Empty enclosure for low-voltage switchgears and controlgears - General requirements
IEC 61643-1+Corr.:1998 Low-voltage surge protective devices - Surge protective devices connected to low-voltage power systems - Requirements and tests
IEC 61643-12:2000 Surge protective devices connected to low-voltage power distribution systems - Selection and application principles
IEC 61643-21:2002+Corr.:2001 Low-voltage surge protective devices - Surge protective devices connected to telecommunications and signalling networks - Performance requirements and testing methods
BDS 17383:96 Electric arc-welding appliances - Plug connections in the welding circuit - Safety requirements **
IEC 884-1:1994 Plugs and socket-outlets for household and similar purposes - Part 1: General requirements
BDS EN 61537:2003 Cable tray systems and cable ladder systems for cable management
BDS EN 60051-8:2002 Direct acting indicating analogue measuring instruments and their accessories - Part 8: Special requirements for accessories
BDS 3248:1974 High voltage a. c. apparatus - Permissible temperature rise at continuous operation - Test methods **
BDS 15701:1983 Electro-technical appliances and equipment - Measuring methods at high voltage testing **
BDS EN 60512-15-8:2003 Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 15: Mechanical tests on contacts and terminations - Section 8: Test 15 h - Contact retention system resistance to tool application
BDS EN 61180-1:2003 High-voltage test techniques for low-voltage equipment - Part 1: Definitions, test and procedure requirements
BDS EN 61180-2:2003 High-voltage test techniques for low-voltage equipment - Part 2: Test equipment
BDS HD 588.1 S1:2003 High-voltage test techniques - Part 1: General definitions and test requirements
BDS 2740:1972 Low-voltage electrical installations - Steel toggles - Dimensions **
BDS 4190:1979 Low-voltage electro-installation enclosures **
BDS 8596:1977 Electrical controlgears for residential buildings - Main watt-hour meter controlgears **
BDS 8597:1977 Electrical controlgears for residential buildings - Trunk controlgears**
BDS 8598:1977 Electrical controlgears for residential buildings - Floor watt-hour meter controlgears **
BDS HD 384.4.43 S1:2001 Electrical installations of buildings - Part 4: Protection for safety - Chapter 43: Protection against overcurrent
BDS HD 384.4.443 S1:2001 Electrical installations of buildings - Part 4: Protection for safety - Chapter 44: Protection against overvoltages of atmospheric origin or due to switching - Section 443: Protection against overvoltages of atmospheric origin or due to switching
BDS EN 71-1:2001+1:2001+2:2003+5:2001+6:2003+7:2003 Safety of toys - Part 1: Mechanical and physical properties
Top



TTL TESTING OF HOUSEHOLD AND SIMILAR ELECTRIC APPLIANCES
BDS EN 60335-1+A11+A12+A1+A13+A14+A15:2001+A16:2003 Safety of household and similar electrical appliances. Part 1: General requirements
BDS EN 60335-2-2+A1+A2:2001 Safety of household and similar electrical appliances - Part 2-2: Particular requirements for vacuum cleaners and water suction cleaning appliances
BDS EN 60335-2-3+1+2:2001 Safety of household and similar electrical appliances - Part 2-3: Particular requirements for electric irons
BDS EN 60335-2-4:2003 Safety of household and similar electrical appliances - Part 2-4: Particular requirements for spin extractors
BDS EN 60335-2-5:2003 Safety of household and similar electrical appliances - Part 2-5: Particular requirements for dishwashers
BDS EN 60335-2-6:2003 Safety of household and similar electrical appliances - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
BDS EN 60335-2-7:2003 Safety of household and similar electrical appliances - Part 2-7: Particular requirements for washing machines
BDS EN 60335-2-8+1:2001 Safety of household and similar electrical appliances - Part 2-8: Particular requirements for shavers, hair clippers and similar appliances
BDS N 60335-2-9+1:2001+2:2001+11:2001+A12:2003+A13:2003 Safety of household and similar electrical appliances - Part 2-9: Particular requirements for toasters, grills, roasters and similar appliances
BDS EN 60335-2-10:2003 Safety of household and similar electrical appliances - Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines
BDS EN 60335-2-11:2003 Safety of household and similar electrical appliances - Part 2-11: Particular requirements for tumbler dryers
BDS EN 60335-2-12:2001 Safety of household and similar electrical appliances - Part 2-12: Particular requirements for warming plates and similar appliances
BDS EN 60335-2-13+2:2001 Safety of household and similar electrical appliances - Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances
BDS EN 60335-2-14+1+2+A11:2001 Safety of household and similar electrical appliances - Part 2-14: Particular requirements for kitchen machines
BDS EN 60335-2-15+1+2:2001 Safety of household and similar electrical appliances - Part 2-15: Particular requirements for appliances for heating liquids
BDS EN 60335-2-16:2003 Safety of household and similar electrical appliances - Part 2-16: Particular requirements for food waste disposers
BDS EN 60335-2-17:2001 Safety of household and similar electrical appliances - Part 2-17: Particular requirements for blankets, pads and similar heating appliances
BDS EN 60335-2-21+1+A11+A12:2003 Safety of household and similar electrical appliances - Part 2-21: Particular requirements for storage water heaters
BDS EN 60335-2-23:2001 Safety of household and similar electrical appliances - Part 2-23: Particular requirements for appliances for skin or hair care
BDS EN 60335-2-24:2002 Safety of household and similar electrical appliances - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers
BDS EN 60335-2-25+1:2001 Safety of household and similar electrical appliances - Part 2-25: Particular requirements for microwave ovens
BDS EN 60335-2-26:2003 Safety of household and similar electrical appliances - Part 2-26: Particular requirements for clocks
BDS EN 60335-2-27+1+11:2001 Safety of household and similar electrical appliances - Part 2-27: Particular requirements for appliances for skin exposure to ultraviolet and infrared radiation
BDS EN 60335-2-28:2003 Safety of household and similar electrical appliances - Part 2-28: Particular requirements for sewing machines
BDS EN 60335-2-29+11:2001 Safety of household and similar electrical appliances - Part 2-29: Particular requirements for battery chargers
BDS EN 60335-2-30+1:2001 Safety of household and similar electrical appliances - Part 2-30: Particular requirements for room heaters
BDS EN 60335-2-31:2003 Safety of household and similar electrical appliances - Part 2-31: Particular requirements for range hoods
BDS EN 60335-2-32:2003 Household and similar electrical appliances - Safety - Part 2-32: Particular requirements for massage appliances
BDS EN 60335-2-34:2002 Safety of household and similar electrical appliances - Part 2-34: Particular requirements for motor-compressors
BDS EN 60335-2-35+1:2001 Safety of household and similar electrical appliances - Part 2-35: Particular requirements for instantaneous water heaters
BDS EN 60335-2-36:2001 Safety of household and similar electrical appliances - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements
BDS EN 60335-2-37:2001 Safety of household and similar electrical appliances - Part 2-37: Particular requirements for commercial electric deep fat fryers
BDS EN 60335-2-38:2001 Safety of household and similar electrical appliances - Part 2-38: Particular requirements for commercial electric griddles and griddle grills
BDS EN 60335-2-39:2003 Safety of household and similar electrical appliances - Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans
BDS EN 60335-2-40+1:2001 Safety of household and similar electrical appliances - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
BDS EN 60335-2-41:2001+1:2002 Safety of household and similar electrical appliances - Part 2-41: Particular requirements for pumps for liquids having a temperature not exceeding 35 C
BDS EN 60335-2-42:2003 Safety of household and similar electrical appliances - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens
BDS EN 60335-2-43:2003 Safety of household and similar electrical appliances - Part 2-43: Particular requirements for clothes dryers and towel rails
BDS EN 60335-2-44:2003 Safety of household and similar electrical appliances - Part 2-44: Particular requirements for ironers
BDS EN 60335-2-45:2001 Safety of household and similar electrical appliances - Part 2-45: Particular requirements for portable heating tools and similar appliances
BDS EN 60335-2-47:2003 Safety of household and similar electrical appliances - Part 2-47: Particular requirements for commercial electric boiling pans
BDS EN 60335-2-48:2001 Safety of household and similar electrical appliances - Part 2-48: Particular requirements for commercial electric grillers and toasters
BDS EN 60335-2-49:2001 Safety of household and similar electrical appliances - Part 2-49: Particular requirements for commercial electric hot cupboards
BDS N 60335-2-50:2002 Safety of household and similar electrical appliances - Part 2-50: Particular requirements for commercial electric bains-marie
BDS N 60335-2-51:2003 Safety of household and similar electrical appliances - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations
BDS N 60335-2-52:2003 Safety of household and similar electrical appliances - Part 2-52: Particular requirements for oral hygiene appliances
BDS EN 60335-2-53:2003 Safety of household and similar electrical appliances - Part 2-53: Particular requirements for sauna heating appliances
BDS EN 60335-2-54:2003 Safety of household and similar electrical appliances - Part 2-54: Particular requirements for surface-cleaning appliances employing liquids
BDS EN 60335-2-55:2003 Safety of household and similar electrical appliances - Part 2-55: Particular requirements for electrical appliances for use with aquariums and garden ponds
BDS EN 60335-2-56:2003 Safety of household and similar electrical appliances - Part 2-56: Particular requirements for projectors and similar appliances
BDS EN 60335-2-58+1:2001 Safety of household and similar electrical appliances - Part 2-58: Particular requirements for commercial electric dishwashing machines
BDS N 60335-2-59:2001 Safety of household and similar electrical appliances - Part 2-59: Particular requirements for insect killers
BDS EN 60335-2-61:2003 Safety of household and similar electrical appliances - Part 2-61: Particular requirements for thermal storage room heaters
BDS EN 60335-2-63:2002 Safety of household and similar electrical appliances - Part 2-63: Particular requirements for commercial electric water boilers and liquid heaters
BDS EN 60335-2-64:2000+1:2003 Safety of household and similar electrical appliances - Part 2-64: Particular requirements for commercial electric kitchen machines
BDS EN 60335-2-65+1:2002 Safety of household and similar electrical appliances - Part 2-65: Particular requirements for air-cleaning appliances
BDS EN 60335-2-66:2003 Safety of household and similar electrical appliances - Part 2-66: Particular requirements for water-bed heaters
BDS EN 60335-2-67:2003 Safety of household and similar electrical appliances - Part 2-67: Particular requirements for floor treatment and floor cleaning machines, for industrial and commercial use
BDS EN 60335-2-68:2003 Safety of household and similar electrical appliances - Part 2-68: Particular requirements for spray extraction appliances, for industrial and commercial use
BDS EN 60335-2-69+1:2001 Safety of household and similar electrical appliances - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use
BDS EN 60335-2-70:2003 Safety of household and similar electrical appliances - Part 2-70: Particular requirements for milking machines
BDS EN 60335-2-71:2003 Safety of household and similar electrical appliances - Part 2-71: Particular requirements for electric heating appliances for breeding and rearing animals
BDS EN 60335-2-72:2002+1:2003 Safety of household and similar electrical appliances - Part 2-72: Particular requirements for automatic machines for floor treatment for commercial and industrial use
BDS EN 60335-2-73:2003 Safety of household and similar electrical appliances - Part 2-73: Particular requirements for fixed immersion heaters
BDS EN 60335-2-74:2001 Safety of household and similar electrical appliances - Part 2-74: Particular requirements for portable immersion heaters
BDS EN 60335-2-75:2003 Safety of household and similar electrical appliances - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines
BDS EN 60335-2-76:2003 Safety of household and similar electrical appliances - Part 2-76: Particular requirements for electric fence energizers
BDS EN 60335-2-78:2003 Safety of household and similar electrical appliances - Part 2-78: Particular requirements for outdoor barbecues
BDS EN 60335-2-79:2002+1:2002+11:2002 Safety of household and similar electrical appliances - Part 2-79: Particular requirements for high pressure cleaners and steam cleaners, for commercial and industrial use
BDS EN 60335-2-80:2002 Safety of household and similar electrical appliances - Part 2-80: Particular requirements for fans
BDS EN 60335-2-81:2003 Safety of household and similar electrical appliances - Part 2-81: Particular requirements for foot warmers and heating mats
BDS EN 60335-2-82:2002 Safety of household and similar electrical appliances - Part 2-82: Particular requirements for service machines and amusement machines
BDS EN 60335-2-84:2003 Safety of household and similar electrical appliances - Part 2-84: Particular requirements for toilets
BDS EN 60335-2-85:2003 Household and similar electrical appliances - Safety - Part 2-85: Particular requirements for fabric steamers
BDS EN 60335-2-87:2003 Household and similar electrical appliances -Safety - Part 2-87: Particular requirements for electric animal stunning equipment
BDS N 60335-2-90:2003 Safety of household and similar electrical appliances - Part 2-90: Particular requirements for commercial microwave ovens
IEC 60335-2-91:2002 Safety of household and similar electrical appliances - Part 2-91: Particular requirements for walk-behind and hend-held lawn trimmers and lawn-edge trimmers
IEC 60335-2-92:2002 Safety of household and similar electrical appliances - Part 2-92: Particular requirements for pedestrian-controlled mains-operated lawn scarifiery and aerators
IEC 60335-2-94:2002 Safety of household and similar electrical appliances - Part 2-94: Particular requirements for scissors type grass shears
BDS EN 60335-2-95:2002 Safety of household and similar electrical appliances - Part 2-95: Particular requirements for drives for vertically moving garage doors for residendential use
BDS EN 60335-2-96:2003 Household and similar electrical appliances - Safety - Part 2-96: Particular requirements for flexible sheet heating elements for room heating
BDS EN 60335-2-97:2002 Safety of household and similar electrical appliances - Part 2-97: Particular requirements for drivers for rolling shutters, awnings, blinds and similar equipment
BDS EN 60335-2-98:2003 Household and similar electrical appliances - Safety - Part 2-98: Particular requirements for humidifiers
IEC 60335-2-99:2003 Safety of household and similar electrical appliances - Part 2-99: Particular requirements for commercial electric hoods
IEC 60335-2-103:2002 Safety of household and similar electrical appliances - Part 2-103: Particular requirements for drives for gates, doors and windows
ST of SIV 3321-81 Electro-mechanical and electric heating products for catering establishments - General technical requirements for safety and test methods **
BDS 2605-86 Portable electric immersion water heaters **
BDS 2099-85 Portable electric heaters with immediate effect **
BDS 1737-85 Portable electric appliances for heating liquids **
BDS 6140-86 Portable electric water heaters for running water **
BDS 1732-85 Portable electric cooking-stoves and electric household hot-plates **
BDS 4606-86 Portable electric cooking-stoves, ovens and cooking tables for building in - Dimensions **
BDS 10655-87 Portable electric rotary juice-maker **
BDS 4714-85 Portable electric grills **
BDS 17107-90 Electric tubular heaters **
BDS EN 60529:2001 Levels of protection provided by the enclosure
BDS N 60065:2002 Audio, video and similar electronic apparatus - Safety requirements
BDS N 60950+1+2+3+4+11:2002 Safety of information technology equipment, including electrical business equipment
BDS EN 60601-1+1+2+13:2003 Medical electrical equipment - Part 1: General requirements for safety
BDS N 60598-1+11:2003+12:2003 Luminaires - Part 1: General requirements and tests
BDS N 60598-2-2:2002+1:2002 Luminaires - Part 2: Particular requirements - Section 2: Recessed luminaires
BDS N 60598-2-3:2002+1:2002+2:2002 Luminaires - Part 2: Particular requirements - Section 3: Luminaires for roads and street lighting
BDS N 60598-2-4:2001 Luminaires - Part 2: Particular requirements - Section 4: Portable general purpose luminaires
BDS N 60598-2-5:2001 Luminaires - Part 2: Particular requirements - Section 5: Floodlights
BDS N 60598-2-6:2002+1:2002 Luminaires - Part 2: Particular requirements - Section 6: Luminaires with built-in transformers or convertors for filament lamps
BDS N 60598-2-7:2002+2:2002+13:2002 Luminaires - Part 2: Particular requirements - Section 7: Portable luminaires for garden use
BDS N 60598-2-8:2002+1:2002 Luminaires - Part 2: Particular requirements - Section 8: Handlamps
BDS N 60598-2-10+1+2:2001 Luminaires - Part 2: Particular requirements - Section 10: Portable child-appealing luminaires
BDS N 60598-2-17:2002+2:2002 Luminaires - Part 2: Particular requirements - Section 17: Luminaires for stage lighting, television film and photographic studios (outdoor and indoor)
BDS N 60598-2-18:2002 Luminaires - Part 2: Particular requirements - Section 18: Luminaires for swimming pools and similar applications
BDS N 60598-2-20:2002+1:2002 Luminaires - Part 2: Particular requirements - Section 20: Lighting chains
BDS N 60598-2-22:2002 Luminaires - Part 2: Particular requirements - Section 22: Luminaires for emergency lighting
BDS N 60598-2-23:2002+1:2002 Luminaires - Part 2: Particular requirements - Section 23: Extra low-voltage lighting systems for filament lamps
BDS N 60598-2-24:2002 Luminaires - Part 2: Particular requirements - Section 24: Luminaires with limited surface temperatures
BDS N 60598-2-25:2002 Luminaires - Part 2: Particular requirements - Section 25: Luminaires for use in clinical areas of hospitals and health care buildings
BDS N 50130-5:2001 Alarm systems - Part 5: Environmental test methods
BDS N 60350:2003 Electric cooking ranges, hobs, ovens and grills for household use - Methods for measuring performance
BDS N 60531:2003 Household electric thermal storage room heaters - Methods for measuring performance
BDS N 60958-1:2001 Digital audio interface - Part1: General
BDS N 60958-3:2001 Digital audio interface - Part 3: Consumer applications
BDS N 60958-4:2001 Digital audio interface - Part 4: Professional applications
BDS N 60961:2000 Helican-scan video-tape cassette system using 12,65 mm (0,5 in) magnetic tape on type L
BDS EN 50148:2001 Electronic taximeters
BDS EN 61010-1:2002 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 1: General requirements
BDS EN 61010-2-031:2001 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-031: Particular requirements for hand-held probe assemblies for electrical measurement and test
BDS EN 61010-2-032:2003 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement
BDS EN 61010-2-032:2001 Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-032: Particular requirements for hand-held current clamps for electrical measurement and test
BDS EN 61028:2002 Electrical measuring instruments - X-Y recorders
Top



TTL TETSING OF MANUAL ELECTRIC INSTRUMENTS
BDS EN 50144-1:2001+A1:2003 Safety of hand-held motor-operated electric tools - Part 1: General requirements
BDS EN 50144-2-1:2001 Safety of hand-held motor-operated electric tools - Part 2-1: Particular requirements for drills
BDS EN 50144-2-2:2001 Safety of hand-held motor-operated electric tools - Part 2-2: Particular requirements for screwdrivers and impact wrenches
BDS EN 50144-2-3+1+2:2003 Safety of hand-held motor-operated electric tools - Part 2-3: Particular requirements for grinders, disk type sanders and polishers
BDS EN 50144-2-4:2001 Safety of hand-held motor-operated electric tools - Part 2-4: Particular requirements for sanders
BDS EN 50144-2-5:2001 Safety of hand-held electric motor operated tools - Part 2-5: Particular requirements for circular saws and circular knives
BDS EN 50144-2-6+1:2001 Safety of hand-held motor-operated electric tools - Part 2-6: Particular requirements for hammers
BDS EN 50144-2-7:2001 Safety of hand-held motor-operated electric tools - Part 2-7: Particular requirements for spray guns
BDS EN 50144-2-8:2001 Safety of hand-held motor-operated electric tools - Part 2-8: Particular requirements for sheet metal shears and nibblers
BDS EN 50144-2-9:2001 Safety of hand-held motor-operated electric tools - Part 2-9: Particular requirements for tappers
BDS EN 50144-2-10:2001 Safety of hand-held motor-operated electric tools - Part 2-10: Particular requirements for jig saws
BDS EN 50144-2-11:2001 Safety of hand-held motor-operated electric tools - Part 2-11: Particular requirements for sabre saws and double blade reciprocating saws
BDS EN 50144-2-14:2001 Safety of hand-held motor-operated electric tools - Part 2-14: Particular requirements for planers
BDS EN 50144-2-15:2001 Safety of hand-held motor-operated electric tools - Part 2-15: Particular requirements for hedge trimmers
BDS EN 50260-1:2004 Safety of hand-held motor-operated electric tools, accumulating battery-powered and battery packs - Part 1: General requirements
BDS EN 61029-1+11+12:2004 Safety of transportable motor operated electric tools - Part 1: General requirements
Top



TTL TESTING OF NOISE AND VIBRATIONS
BDS EN 50144-1:2001+1:2003 Safety of hand-held motor operated electric tools - Part 1: General requirements
BDS 16013-84 Local vibrations - Acceptable valuations and assessment methods **
BDS N 60034-9:2002 Rotating electrical machines - Part 9: Noise limits
BDS N 60034-14:2003 Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration
ST of SIV 4672-1984 Household electric appliances - Limitary noise levels and methods for determination **
BDS 5498-88 Household electric vacuum cleaners **
BDS 16583-87 Electro-mechanical and electric heating devices for household and similar purposes - Coffee grinders **
BDS 7604-82+I1:2001 Start-regulating apparatus for gas-discharged lamps for general use **
BDS 8911-86 Lever typewriters **
BDS 5444-82 Household electric fans **
BDS 15878-84 Induction ovens for melting **
BDS 4329-88 Semi-conductor rectifiers **
BDS N 60076-10:2003 Power transformers - Methods for determination of the sound level of the sound power
BDS 10965-73 Low-powered grid transformers for low voltage - Technical requirements **
BDS 7461-75 Transformers and drossels for gas-discharged tubes **
BDS ISO 10816-3:2002 Vibrations - Vibration assessment of the machines through measuring of their non-rotating parts - Part 1: General requirements
BDS 14478-82 Noise - Acceptable levels at the places of work - General requirements for conducting the tests **
BDS EN 60704-2-1:2003 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-1: Particular requirements for vacuum cleaners
BDS EN 60704-2-3:2003 Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances - Part 2-3: Particular requirements for dishwashers
BDS EN 60704-2-4:2003 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-4: Particular requirements for washing machines and spin extractors
BDS EN 60704-2-6:2003 Test code for the determination of airborne acoustical noise emitted by household and similar electrical appliances - Part 2-6: Particular requirements for tumble-dryers
BDS EN 60704-2-7:2003 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-7: Particular requirements for fans
BDS EN 60704-2-8:2003 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-8: Particular requirements for electric shavers
BDS EN 60704-2-11:2003 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-11: Particular requirements for electrically operated food preparation appliances
BDS EN 60704-2-13:2003 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-13: Particular requirements for range hoods
BDS 16431-86 Household electrical appliances - Methods for measurement of vibrations **
* The used terminology is according to BDS EN 61086-1:2003 Technical requirements for coatings for loaded wired printing-boards (auxiliary coatings) - Part 1: Terms and definitions, classification and general requirement
** The translation is not original
Top



TTL ENVIRONMENTAL TESTING AND MECHANICAL DYNAMICAL TESTS
by letters Indices Standards according to which the tests are carried out
General principles and guidance IEC N 60068-1:1988+A1:1992Environmental testing - Part 1: General and guidance;
BDS 4972:1971 Product classification regarding the environmental impact - Climate performances - Climate testing ***;
BDS 15467:1982Environmental factors - Nomenclature and characteristics ***;
BDS 17033:1989 Environmental factors - Terms and definitions ***;
BDS 17303:1993 Classification of the environmental conditions - Part 1: Classification of the environmental parameters and their severity degrees ***.
A: Cold IEC N 60068-2-1:1990+A1:1993+A2:1994 Environmental testing - Part 2: Tests - Tests A: Cold.
B: Dry heat IEC 60068-2-2:1974+A1:1993+A2:1994 Environmental testing - Part 2: Tests - Tests B: Dry heat.
C: Damp heat (steady state) IEC 60068-2-66:1994 Environmental testing - Part 2: Test methods - Test Cx: Damp heat, steady state (unsaturated pressurized vapour);
IEC 60068-2-67:1995 Environmental testing - Part 2: Tests - Test Cx: Damp heat, steady state, accelerated test primarily intended for the components;
IEC 60068-2-78:2001 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state;
IEC 60068-3-4:2001 Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests;
BDS 4975:1981 Environmental testing - High humidity (steady state) testing ***.
D: Damp heat (cyclic) IEC 60068-2-30:1980+A1:1985 Environmental testing - Part 2: Tests - Tests Db and guidance: Damp heat, cyclic (12 + 12-hour cycle)
E: Impact (for example shock, bump, drop and topple, free fall, bounce) * IEC 60068-2-27:1987 Environmental testing - Part 2: Tests - Test Ea and guidance: Shock;
IEC 60068-2-29:1987 Environmental testing - Part 2: Tests - Test Eb and guidance: Bump;
IEC 60068-2-31:1969+A1:1982 Environmental testing - Part 2: Tests - Test Ec: Drop and topple, primarily for equipment-type specimens;
IEC 60068-2-32:1975+A1:1995 Environmental testing - Part 2: Tests - Test Ed: Free fall;
IEC 60068-2-55:1987 Environmental testing - Part 2: Tests - Test Ee and guidance: Bounce;
IEC 60068-2-81:2003 Environmental testing - Part 2-81: Tests - Test Ei: Shock - Shock response spectrum syntesis.
F: Vibration* IEC 60068-2-6:1995 Environmental testing - Part 2: Tests - Test Fc: Vibration (sinusoidal);
IEC 60068-2-57:1999 Environmental testing - Part 2-57: Tests - Test Ff: Vibration - Time-history method;
IEC 60068-2-59:1990 Environmental testing - Part 2: Tests - Test Fe: Vibration - Sine-beat method;
IEC 60068-2-64:1993 Environmental testing - Part 2: Test methods - Test Fh: Vibration, broad-band random (digital control) and guidance;
IEC 60068-3-8:2003 Environmental testing - Part 3-8: Supporting documentation and guidance - Selecting amongst vibration tests.
G: Acceleration (steady state) IEC 60068-2-7:1983+A1:1986 Environmental testing - Part 2: Tests - Test Ga: Acceleration, steady state.
H: Awaiting allocation (was originally allotted to "storage" tests) IEC 60068-2-48:1982 Environmental testing - Part 2: Tests. Guidance on the application of the tests of IEC 68 to stimulate the effects of storage;
IEC 60721-3-1:1997 Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 1: Storage;
IEC 60721-3-3:1994+2:1996 Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 3: Stationary use at weatherprotected locations;
IEC 60721-3-4:2003+1:1995 Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 4: Stationary use at non-weatherprotected locations.
J: Mould growth IEC 60068-2-10:1988 Environmental testing - Part 2: Tests - Test J and guidance: Mould growth;
BDS HD 323.2.10 S3:2003 Environmental testing - Part 2: Tests - Test J and guidance: Mould growth.
K: Corrosive atmospheres (salt mist) IEC 60068-2-11:1981 Environmental testing - Part 2: Tests - Test Ka: Salt mist;
IEC 60068-2-52:1996 Environmental testing - Part 2: Tests - Test Kb: Salt mist, cyclic (sodium, chloride solution);
BDS ISO 9227:1995 Corrosion tests in artificial atmospheres - Salt spray tests;
IEC 60068-2-42:1982 Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections;
BDS 15382:1993 Basic environmental testing procedures. Part 2: Tests. Test : Sulphur dioxide test for contacts and connections;
IEC 60068-2-43:2003 Environmental testing - Part 2-43: Tests - Test Kd: Hydrogen sulphide test for contacts and connections;
BDS HD 323.2.46 S1:2003 Basic environmental testing procedures - Part 2: Tests - Guidance to Test Kd: Hydrogen sulphide test for contacts and connections;
BDS 15977:1984 Environmental testing - Hydrogen sulphide testing ***;
BDS 10020:1990 Packing - Salt mist testing procedure ***;
L: Dust and sand IEC 60068-2-68:1994 Environmental testing - Part 2: Tests - Test L: Dust and sand;
EN 50102:1996 Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code).
M: Air pressure (high and low) IEC 60068-2-13:1983 Environmental testing - Part 2: Tests - Test M: Low air pressure;
BDS HD 478.2.3 S1:2003 Classification of environmental conditions - Part 2: Environmental conditions appearing in nature - Air pressure.
N: Change of temperature IEC 60068-2-14:1984+A1:1986 Environmental testing - Part 2: Tests - Test N: Change of temperature;
IEC 60068-2-33:1971+A1:1978 Environmental testing - Part 2: Tests - Guidance on change of temperature tests
IEC 60068-3-5:2001 Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers;
IEC 60068-3-7:2001 Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A and B (with load);
BDS 16061:1984 Electro-technical ceramic materials - Methods for determination of the resistance to abrupt temperature changes ***.
P: Awaiting allocation (was originally allotted to "flammability" tests now being dealt with as "fire hazard" tests) IEC 60695-1-1:1999+corr.Jan.2000+corr.Aug.2000 Fire hazard testing - Part 1-1: Guidance for assessing the fire hazard of electrotechnical products - General guidelines;
IEC 60695-2-1/0:1994 Fire hazard testing - Part 2: Test methods - Section 1/sheet 0: Glow-wire test methods;
IEC 60695-2-1/1:1994 + A1:1995 Fire hazard testing - Part 2: Test methods - Section 1/sheet 1: Glow-wire end-product test and guidance;
IEC 60695-2-1/2:1994 Fire hazard testing - Part 2: Test methods - Section 1/sheet 2: Glow-wire flammability test on materials;
IEC 60695-2-1/3:1994 Fire hazard testing - Part 2: Test methods - Section 1/sheet 3: Glow-wire ignitability test on materials;
IEC 60695-2-2:1991 Fire hazard testing - Part 2: Test methods - Section 2: Needle-flame test;
IEC 60695-1-2:1982 Fire hazard testing - Part 1: Guidance for the preparation of requirements and test specifications for assessing fire hazard of electrotechnical products - Guidance for electronic components;
IEC 60695-1-3:1986 Fire hazard testing - Part 1: Guidance for the preparation of requirements and test specifications for assessing fire hazard of electrotechnical products - Guidance for use of preselection procedures;
IEC 60695-2-3:1984 Fire hazard testing - Part 2 : Test methods - Bad-connection test with heaters.
Q: Sealing (including panel sealing, container sealing and protection against ingress and leakage of fluid) IEC 60068-2-17:1994 Basic environmental testing procedures- Part 2: Tests - Test Q: Sealing.
R: Water (for example rain, dripping water, frost, dew) IEC 60068-2-18:2000 Environmental testing - Part 2-18: Tests - Test R and guidance: Water;
BDS 16487:1986 Electro-technical and radio electronic products - Environmental testing - Frost and dew tests ***.
S: Radiation (for example solar, but excluding electromagnetic) IEC 60068-2-5:1975 Environmental testing - Part 2: Tests - Test Sa: Simulated solar radiation at ground level
IEC 60068-2-9:1975+A1:1984 Environmental testing - Part 2: Tests. Guidance for solar radiation testing.
T: Soldering (including resistance to heat from soldering) IEC 60068-2-20:1979+A2:1987 Environmental testing - Part 2: Tests - Test T: Soldering;
IEC 60068-2-44:1995 Environmental testing - Part 2: Tests - Guidance on test T: Soldering;
BDS HD 323.2.20 S3:2003 Basic environmental testing procedures - Part 2: Tests - Test T: Soldering;
IEC 60068-2-54:1985 Environmental testing - Part 2: Tests - Test Ta: Soldering - Solderability testing by the wetting balance method;
IEC 60068-2-58:1999 Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD);
IEC 60068-2-69:1995 Environmental testing - Part 2: Tests - Test Te: Solderability testing of electronic components for surface mount technology by the wetting balance method.
U: Robustness of termination (of components) IEC 60068-2-21:1999 Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices;
BDS 7760:1981 Electro-technical and radio electronic products - Environmental testing - Testing of robustness of terminations ***.
V: Awaiting allocation (was originally allocated to "acoustic noise" but "vibration acoustically induced" will now be Test Fg, one of the vibration family of tests) IEC 60068-2-65:1993 Environmental testing - Part 2: Methods of test - Test Fg: Vibration, acoustically induced.
X: Contaminating fluids (oils, brake liquids, cooling fluids, grease, fuels, accumulating electrolyte, etc.) IEC 60068-2-45:1980+A1:1993 Environmental testing - Part 2: Tests - Test XA and guidance: Immersion in cleaning solvents;
IEC 60068-2-70:1995 Environmental testing - Part 2: Tests - Test Xb: Abrasion of marking and letterings caused by rubbing of fingers and hands;
IEC 60068-2-74:1999 Environmental testing - Part 2: Tests - Test Xc: Fluid contamination
Z: Combined tests
IEC 60068-2-38:1974 Environmental testing - Part 2: Tests - Test Z/AD: Composite temperature / humidity cyclic test;
IEC 60068-2-39:1976 Environmental testing - Part 2: Tests - Test Z/AMD: Combined sequential cold, low air pressure, and damp heat test;
IEC 60068-2-40:1976+A1:1983 Environmental testing - Part 2: Tests - Test Z/AM: Combined cold / low air pressure tests;
IEC 60068-2-41:1976+A1:1983 Environmental testing - Part 2: Tests - Test Z/BM: Combined dry heat / low air pressure;
IEC 60068-2-50:1983 Environmental testing - Part 2: Tests - Test Z/AFc: Combined cold / vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens;
IEC 60068-2-51:1983 Environmental testing - Part 2: Tests - Test Z/BFc: Combined dry heat / vibration (sinusoidal) tests for both heat-dissipating and non-heat-dissipating specimens;
IEC 60068-2-61:1974 Environmental testing - Part 2: Test methods - Test Z/ABDM: Climatic sequence;
IEC 60068-3-1:1974+A1:1978 Environmental testing - Part 3: Background information - Section One: Cold and dry heat tests;
IEC 60068-3-6:2001 Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature / humidity chambers;
BDS HD 478.2.1 S1:2003 Classification of environmental conditions - Part 2: Environmental conditions appearing in nature - Temperature and humidity;
BDS HD 478.2.4 S1:2003 Classification of environmental conditions - Part 2: Environmental conditions appearing in nature - Solar radiation and temperature;
BDS HD 478.2.5 S1:2003 Classification of environmental conditions - Part 2: Environmental conditions appearing in nature - Section 5: Dust, sand, salt mist.
  Transportation ability IEC 60721-3-2:1997 Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 2: Transportation;
IEC 60721-3-7:1995+1:1996 Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 7: Portable and non-stationary use.
Notes:
* Fixing is according to IEC 60068-2-47:1999 Environmental testing - Part 2-47: Test methods - Mounting of components, equipment and other articles for vibration impact and similar dynamic tests.
** The Laboratory is in possession of the equipment compliance with this standard but it is not put in operation for lack of interest in these tests.
*** The translation is not original.
Top